Ceyear 4041 Series, User Manual

Page: 135 / 203

Chapter IX Field Strength Measurement Mode (Option)
123
Section 3 Description of the Field Strength Measurement Menu
9.3.1 Frequency Menu (PScan Measurement Mode)
Pot Freq
500MHz
Frequency
Freq Step
Auto Man
Freq Track
Off On
·[Pot Freq]: Press
【
Freq
】
→[Pot Freq] to set the dot frequency by selecting [GHz],
[MHz], [kHz] or [Hz] in the frequency unit menu through the numeric keys on the
front panel or using
【
↑
】
or
【
↓
】
and knob.
·[Special Attention]: The dot frequency shall be set within the range of 1 MHz ~
the top freq of the mode .
·[Freq Step]: Press
【
Freq
】 →[Freq Step Auto Man] to change the dot frequency step
by setting
【
↑
】
or
【
↓
】
and knob . The frequency step is set to be 1 MHz
automatically.
·[Freq Track Off On]: Press
【
Freq
】
→[Freq Track Off On] to set the On or Off state
of the frequency track. When the frequency track is On, the instrument can
automatically track the frequency at the peak point and display the tracked frequency in
the frequency display area on the current screen.
·[Special Attention]: The peak point at which the frequency is tracked is the one at
which the amplitude signal is searched within the current bandwidth range .