Ceyear 4041 Series, User Manual

Page: 128 / 203

Chapter VIII Channel Scanner Mode (Option)
116
8.3.3 Frequency Scanner Menu
Start Freq
890.000MHz
Freq Scanner
Step Freq
200.000kHz
Bandwidth
200.000kHz
Number of
Channels
< Back
>
·[Start Freq]: Press
【
Scanner
】
→[Freq Scanner]→[Start Freq] to set the center
frequency of the start channel to be scanned.
·[Step Freq]: Press
【
Scanner
】
→[Freq Scanner]→[Step Freq] to set the frequency step
between the channels.
·[BandWidth]: Press
【
Scanner
】
→[Freq Scanner]→[BandWidth]to set the bandwidth
of the channel to be measured.
·[Number of Channels]: Press
【
Scanner
】
→[Freq Scanner] →[Number of Channels]
to set the number of channels to be measured. At most, 20 channels can be measured.
8.3.4 List sweep Menu
Edit list >
List Scanner
Number of
Channels
·[Edit List]: Press
【
Scanner
】
→[List sweep]→[Edit List] to make the corresponding
list edit menu pop up. For details, see the [Edit List] menu.
·[Number of Channels]: Press
【
Scanner
】
→[List sweep] →[Number of Channels] to
set the number of channels to be measured. At most, 20 channels can be measured.
Signal
Std
Edit list
Channel
Frequency
Bandwidth
Done
Cancel
>
·[Signal Std]:
Press [Edit List]→[Signal Std] to make the signal standard list pop up,
select the required signal standard through relevant menus including [Header],
[Footer], [Page Up] and [Page Down], and click [Recall].
·[Channel]: Press [Edit List]→[Channel] to display such information as the selected
signal standard and channel range. Users can also edit the channel No., and click
[Done] to save the setting.
·[Frequency]:
Press [Edit List]→[Frequency] to edit the center frequency of the
selected channel, and click [Done] to save the setting.
·[BandWidth]:
Press [Edit List]→[BandWidth] to edit the bandwidth of the selected
channel, and click [Done] to save the setting.
·[Done]:
Press [Edit List]→[Done] to save the modified setting and return to the Scan
Custom List menu.
·[Cancel]:
Press [Edit List]→[Cancel] to cancel the modified setting and return to the
Scan Custom List menu
。