background image

20060301

 

(9) To modify the 

y

2 graph (2

x

 + 1), tap the down graph controller arrow to make it the 

graph active. 

• You can use the up and down cursor keys or graph controller arrows to switch 

between the two graphs, as required. 

• Repeat steps (7) and (8) to modify the currently selected graph. 

Tap  .

Tap  .

3-5-3

Modifying a Graph

  (10) To quit graph modification, tap 

 on the icon panel. 

• This causes “Modify” to disappear from the display, returning to the normal Graph 

window. 

E

E

E

Summary of Contents for ClassPad 330



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews: