Canon VK-16 v2.0, Administrator'S Manual

Page: 266 / 302

266
Messages List
An attempt was made to start the
Viewer, however a connection to the
specified Master Storage Server
could not be established.
You attempted to connect to an older
version (V1.1 or earlier) of the
Storage Server as the Master
Storage Server. Alternately, you
attempted to connect to a V2.0
Master Storage Server from an older
version (V1.2, V1.3, or V1.4) Viewer.
You attempted to connect to an older
version (V1.1 or earlier) of the
Storage Server as a Slave Storage
Server. Alternately, you attempted to
connect an older version (V1.2, V1.3,
or V1.4) Viewer to a V2.0 Slave
Storage Server.
You attempted to connect a V1.0 VK
Viewer to a V2.0 Slave Storage
Server.
You attempted to connect a V1.1 VK
Viewer to a V2.0 Slave Storage
Server.
An attempt was made by a user
without the administrator privilege to
switch to the Configuration window.
A connection to a Storage Server
other than the Master Storage Server
failed when you accessed the
Configuration and Preferences
screen.
An attempt was made to save the
changes in the Camera Server list in
the
Configuration and Preferences
screen, however a connection to the
Storage Server could not be
established.
Connection to the Master Storage
Server failed. Check the settings
and try again.
Failed to connect to Master Storage
Server ‘IP address of Storage
Server’ because of version
mismatch.
Recording settings for camera
servers will not be available on the
storage server ‘Storage Server
Name’. Version mismatch.
Failed to connect to Storage Server
‘Storage Server Name’. Recording
settings for camera servers will not
be available on the storage server
‘Storage Server Name’.
Recording settings for camera
servers will not be available on the
storage server ‘Storage Server
Name’. HTTP error 505.
The configuration window can only
be used by administrators.
The recording settings of the
camera server cannot be configured
for this Storage Server ‘Storage
Server name’.
‘Cause of the error’
The changes cannot be saved
because it cannot be sent to
‘Storage Server name’.
Starting the
Viewer
Configuration
and Preferences
screen
Messages Cause
Error Messages of Viewer
The ‘ ’ part of the message differs depending on the situation.