Canon VK-16 v2.0 Administrator'S Manual Download Page 90

Page: 90 / 302

Add Storage Server

Delete Storage Server

In the

Storage and Camera Server Summary

, select the

Storage Servers

tab.

A list of Storage Servers which have already been added is displayed.

Click a Storage Server in the list to highlight it and select

Delete

from the

Edit

menu.

Alternatively, click a Storage Server to select it, then press the

Delete

key on your

keyboard.

A confirmation dialog will appear. Click

Yes

Click

to cancel deletion.

To save changes, click

Save Changes

at the

bottom right-hand corner
of the

Camera Summary

window.

Click

Discard Changes

cancel any changes you
have made.

If a Storage Server is deleted, all Location, Zone, thumbnail
and Layout information for cameras associated with this
Storage Server will be deleted as well.

The Master Storage Server cannot be edited.

Note

Summary of Contents for VK-16 v2.0















































































































































































































































































































Search results

Summary of Contents for VK-16 v2.0

Reviews:

Related manuals for VK-16 v2.0

Brands by name

Popular brands

Canon VK-16 v2.0, Administrator'S Manual

Search results

Summary of Contents for VK-16 v2.0

Reviews:

Related manuals for VK-16 v2.0

Brands by name

Popular brands