Canon VK-16 v2.0 Administrator'S Manual Download Page 50

Page: 50 / 302

Chapter Overview

The Storage Server can record videos and events (sensor input and motion detection) data
from multiple camera servers.

This chapter explains how to set the installed Storage Server to use the storage server.

Use the

Storage Server Configuration

dialog to set the Storage Server.

In the

Storage Server Configuration

dialog, you can configure settings for disk

management, event management, event notification, and user management.

●

Settings Tab

In the

Settings

tab, specify the Storage Server name, Proxy Server, and recording

options.

●

Event Tab

You can set the Storage Server to send an e-mail to the user when an event has occurred.

In the

Event

tab, specify the priority for each event type.

●

Event Notification Tab

In the

Event Notification

tab, configure the settings for sending an e-mail when an event

has occurred.

●

User Management Tab

In the

User Management

tab, add users and assign privileges to them.

Summary of Contents for VK-16 v2.0















































































































































































































































































































Search results

Summary of Contents for VK-16 v2.0

Reviews:

Related manuals for VK-16 v2.0

Brands by name

Popular brands

Canon VK-16 v2.0, Administrator'S Manual

Search results

Summary of Contents for VK-16 v2.0

Reviews:

Related manuals for VK-16 v2.0

Brands by name

Popular brands