Canon VK-16 v2.0, Administrator'S Manual

Page: 57 / 302

Stora
g
e
S
er
ver
Configuration
Ref
erence
Setting the Settings Tab
57
3
●
Enter the Storage Server Proxy Address
If the Storage Server needs to access
Camera Servers via proxy server, you
may need to configure proxy settings.
* See “When using a proxy server” (
➝
P. 12).
In the Storage Server Proxy
field, tick the Enable the
following proxy server box.
Enter the Proxy server address
and Port .
For more information on proxy server usage, contact your Camera Server administrator.
2
1
●
Enter Recorded Video Settings
Maximum retained history -
Check the Maximum retained
history option and enter a value
from 1 to 999 and then select
Days or Weeks from the drop-
down menu.
Maximum file size/duration - Check the Maximum file size/duration option, enter
a value, and select MB or Hours . You can enter 32 - 1024 for MB and 1 - 24 for
Hours . If you do not enter a value, 1024 MB or 24 hours is used for the Maximum
file size/duration value.
Low disk space warning level - Enter a percent value.
When the remaining space falls below the specified value, the event will be
displayed and a notification will be e-mailed (
➝
P. 53, 71).
Reduce recording frame rate when disk is under high load - When disk is highly
loaded, recording frame rate is temporarily reduced to prevent the recording from
stopped. Refer to Chapter 6 for details. This function is available for JPEG video
recording. It cannot be used for MPEG-4 video recording (VB-C60).
4
3
2
1
VK-64/16
VK-64/16
VK-64/16
VK-64/16
VK-64/16
VK-64/16