Canon VK-16 v2.0 Administrator'S Manual Download Page 139

Page: 139 / 302

139

Register

Camera

Ser

ver

and

et
Recor

ding

Sc
hedule

Set Preset Tour

Check the settings and click

This returns to the

Preset Tour Settings

dialog.

●

Test the Preset Tour

Check the

Preset Tour

box and click

Settings

The

Preset Tour Settings

dialog appears.

Click

Start Test

After clicking

Start Test,

the Preset Tour is executed once and you can confirm the

operation.

●

Change the Preset Settings

Check the

Preset Tour

box and click

Settings

The

Preset Tour Settings

dialog appears.

Select a preset to change from the
list and click

Edit

The

Preset Tour (Edit)

dialog

appears.

For the selected preset, change the

Speed (PT)

Speed (Z)

, or

Pause (sec)

settings.

Check the settings and click

This returns to the

Preset Tour Settings

dialog.

For VB-C300 and VB-C60, you can return the focus to the default
setting by checking the Focus is returned to default when the
camera is operated. option.

Tip

Summary of Contents for VK-16 v2.0















































































































































































































































































































Search results

Summary of Contents for VK-16 v2.0

Reviews:

Related manuals for VK-16 v2.0

Brands by name

Popular brands

Canon VK-16 v2.0, Administrator'S Manual

Search results

Summary of Contents for VK-16 v2.0

Reviews:

Related manuals for VK-16 v2.0

Brands by name

Popular brands