Canon VK-16 v2.0 Administrator'S Manual Download Page 196

Page: 196 / 302

196

Arrange Video Windows

●

Exposure Control Items (when the Exposure Mode is Auto)

●

Exposure Control Items (when the Exposure Mode is Manual)

Set the Exposure Mode to

Auto

(VB-

C60, VB-C300).

Auto

: Automatically adjusts the

exposure.

Auto (Flicker less):

This mode is only for the VB-C60.
Refer to the Users Manual of the
camera for details.

Auto (shutter priority):

Allows the value of the shutter
speed to be specified.

Set the Exposure Mode to

Manual

(VB-

C300, VB-C60).

Manual

: Dragging slide bars adjust the

aperture value, shutter speed,
and gain value.

Drag each slide bar to adjust the
aperture value, shutter speed, or gain
value.

Selects the Metering Mode (VB-C60
only).
Refer to the Users Manual of the
camera for details.

Selects the Exposure Compensation
value. (VB-C300, VB-C50i series)

Off:

Exposure compensation is off.

Low:

Performs a low level of
exposure compensation.

Medium:

Performs a medium level of
exposure compensation.

High:

Performs a high level of
exposure compensation.

Exposure can be adjusted for VB-C60 and VB-C300 only.

For the VB-C60, the values of exposure compensation are -3,
-2, -1, 0, +1, +2, +3.

The Metering Mode is available for VB-C60 only. The mode is
deactivated when using other models.

Note

Summary of Contents for VK-16 v2.0















































































































































































































































































































Search results

Summary of Contents for VK-16 v2.0

Reviews:

Related manuals for VK-16 v2.0

Brands by name

Popular brands

Canon VK-16 v2.0, Administrator'S Manual

Search results

Summary of Contents for VK-16 v2.0

Reviews:

Related manuals for VK-16 v2.0

Brands by name

Popular brands