Canon VB-H47 Operation Manual Download Page 20

Page: 20 / 195

Install the necessary software.

Necessary Software

The following software is needed:

• Camera Management Tool

• Recorded Video Utility

Installation



Installation Methods

The software can be installed by [Easy Installation] that enables batch installation, or by [Custom Installation] that

allows users to select the software.



Installing Software

The installation screen is displayed.

Note

• If the [User Account Control] screen is displayed, click [Yes] or [Continue].

Select [Easy Installation] to install all the included software (Camera Management Tool and Recorded Video

Utility).

Select [Custom Installation] to install software individually by selecting which software to be installed and how it is

installed.

The Camera Management Tool icon and Recorded Video Utility icon will be displayed on the desktop.

Installing Software

Confirm that all other applications have been closed.

Double-click [VBToolsInstall.exe].

elect the installation method.

Follow the on-screen instructions, then click [Exit] or [Reboot] on the Installation Complete screen.

Summary of Contents for VB-H47




































































































































































































Search results

Summary of Contents for VB-H47

Reviews:

Related manuals for VB-H47

Brands by name

Popular brands

Canon VB-H47, Operation Manual

Search results

Summary of Contents for VB-H47

Reviews:

Related manuals for VB-H47

Brands by name

Popular brands