Canon VB-H47 Operation Manual Download Page 107

Page: 107 / 195

107



Video Detection

Detects changes in the video in a set detection area. There are seven detection types to suit the users needs.

Moving Object Detection

Detects moving objects. This function can be used to detect visitors or suspicious individuals.

Moving object detection is triggered while moving objects are inside the detection area.

Abandoned Object Detection

Detect objects that are carried in and abandoned for more than a certain duration. This function can be used to

detect suspicious objects that have been left behind.

An object is judged as abandoned if it is left and remain in the detection area for longer than the specified duration.

Removed Object Detection

Detect objects that have been removed. This can be used to detect actions such as taking away valuables.

An object is judged as removed if it is taken away from the detection area for longer than the specified duration.

Background Video
Generated

People entering/exiting

Change in Detection Area

Judgement

Moving Object Detection
ON

Detection begins when a

moving object enters the

designated area.

Detected

Background Video
Generated

Object abandoned

Change in Detection Area

Judgement

Abandoned Object Detected

The object is abandoned
and detection begins after
specified duration.

Detected

Background Video
Generated

Removing an object

Change in Detection Area

Judgement

Object Removal Detected

The picture (object) is
removed and detection
begins after a specified
duration.

Detected

Summary of Contents for VB-H47




































































































































































































Search results

Summary of Contents for VB-H47

Reviews:

Related manuals for VB-H47

Brands by name

Popular brands

Canon VB-H47, Operation Manual

Search results

Summary of Contents for VB-H47

Reviews:

Related manuals for VB-H47

Brands by name

Popular brands