Canon VB-H47 Operation Manual Download Page 148

Page: 148 / 195

148

[

ynchronize with computer time]

The date and time will be synchronized with that of the computer currently accessing the camera. After clicking [Apply],

[Settings Method] will change to [Set manually].

[Time Zone] is not automatically selected, so set it if necessary.

Note

• When unable to connect to the NTP server due to incorrect NTP server IP address, etc., [Last Sync Time] will not be updated, or will be

left blank.

[Time Zone]

Select the appropriate time zone.

When the time zone is changed and [Apply] is clicked, the date and time display will be automatically changed based on

the selected time zone.

[Daylight

aving Time]

Select whether to automatically adjust for daylight saving time according to the time zone.

Summary of Contents for VB-H47




































































































































































































Search results

Summary of Contents for VB-H47

Reviews:

Related manuals for VB-H47

Brands by name

Popular brands

Canon VB-H47, Operation Manual

Search results

Summary of Contents for VB-H47

Reviews:

Related manuals for VB-H47

Brands by name

Popular brands