Canon VB-H47, Operation Manual

Page: 64 / 195

64
[ S hutter S peed]
If [Exposure] is set to [Auto (Shutter-priority AE)] or [Manual], the shutter speed can be fixed.
Note
• Slower shutter speeds generate residual images in video when capturing a moving subject.
• When capturing a moving subject, selecting a higher shutter speed can reduce blurry video capture.
[Aperture]
If [Auto (Aperture-priority AE)] or [Manual] is selected for [Exposure], set a desired aperture.
Moving the slider to the left closes the aperture and darkens the image. Moving the slider to the right opens the aperture
and brightens the image.
[Gain]
If [Manual] is selected for [Exposure], set the sensitivity according to brightness.
Moving the slider to the left darkens the video, and moving it to the right brightens video.
[Exposure Compensation]
When [Exposure] is set to other than [Manual], the brightness of the video can be adjusted by selecting the exposure
compensation value.
[Metering Mode]
When [Exposure] is set to other than [Manual], it is possible to select a metering mode.
[Center-Weighted]
Performs photometry with the entire screen center-weighted.
Even if there is a slight difference in light and dark around the screen, subjects near the center will have the appropriate
exposure.
Use this when the subject is near the center of the screen.
[Average]
Performs photometry evenly on the entire screen.
This enables to obtain stable exposure even in shooting environments with large differences in light and dark on the
screen.
Use this to stabilize the exposure for scenes when cars are passing or people are entering and exiting.
[ S pot]
Performs photometry on the center of the screen.
This enables to obtain the appropriate exposure for subjects in the center of the screen, regardless of differences in light
and dark around the screen.
Use this to adjust the exposure on the center of the screen when the subject is hit by spotlights or backlit.
[ S pecify Area]
Controls to achieve the optimal brightness in the specified area.
Frame’s position and size displayed on the video display area can be set as desired.
Important
• A speed slower than [Shutter Speed Limit (Lower)] cannot be selected.
• When [Exposure] is set to [Auto (Flickerless)], a speed slower than 1/100 sec. (at system frequency 60 Hz) or 1/120 sec. (at system
frequency 50 Hz) cannot be selected.
Important
• Setting a slow shutter speed may prevent the intelligent function from working correctly. Select a shutter speed that suits the scene to
be captured and the purpose.
Important
• When [Use WDR] is set to [Enable], fixed to [Specify Area].
HM4x