Canon VB-H47 Operation Manual Download Page 53

Page: 53 / 195

This section describes how to display the Settings page, and common operations to each Settings page.

Note

• The Settings page can only be operated by administrators.

• Use the Camera Management Tool in advance to configure the administrator account and network settings.

Accessing the Settings Page

Directly enter the IP address set with the Camera Management Tool into a web browser to display the Settings page of the

camera.

Note

• The Settings page can also be accessed from the Camera Management Tool. For details, refer to “Camera Management Tool User

Manual”.

The user authentication window is displayed.

The Settings menu is displayed.

Note

• The Viewer is displayed when [System] > [Viewer] > [General] > [Default Page] is set to [Display Viewer] in the Settings menu

(P. 146).

How to Use the Settings Page

tart the web browser.

Enter the IP address, and press the Enter key.

Enter the administrator name and administrator password, and click [

ign in].

Important

• If an administrator and authorized user(s) share and use a Viewer on the same computer, it is strongly recommend not to save

the password on a web browser.

Summary of Contents for VB-H47




































































































































































































Search results

Summary of Contents for VB-H47

Reviews:

Related manuals for VB-H47

Brands by name

Popular brands

Canon VB-H47, Operation Manual

Search results

Summary of Contents for VB-H47

Reviews:

Related manuals for VB-H47

Brands by name

Popular brands