Canon VB-H47, Operation Manual

Page: 18 / 195

18
Step 1 Preparing to Install the Camera
Make preparations to use the camera via a network.
Install the necessary software

“Installing S oftware” (P. 20)
Check/configure the computer and web browser security settings

“Checking Windows S ettings” (P. 21)
Use the Camera Management Tool to configure initial camera settings.

“Configuring Initial Camera S ettings” (P. 23)
Step 2 Installing the Camera
Install the camera to suit the environment that it will be used in.

“Installation Guide”
Step 3 Setting the Camera Angle
Set the camera angle on the Settings page while checking the video in the computer.

“ S etting the Camera Angle” (P. 25)
Step 4 Using the Camera Viewers
Operate the camera while viewing the video in the Viewer.

“Camera Viewer” (P. 26)
Step 5 Adjusting Advanced Settings According to Its Use
Advanced settings can be made in the Settings page, such as for camera control and security, according to how the
camera will be used.
Settings can also be made using the Camera Management Tool. For details, refer to “Camera Management Tool User
Manual”.

“ S ettings Page” (P. 52)
Troubleshooting
For error messages or problems, refer to “Appendix” (P. 160).
Steps for Setting Up the Camera
S820D/S920F