Canon VB-H47, Operation Manual

Page: 147 / 195

147
Camera date and time settings.
Current Date and Time
The date and time set in the camera are displayed.
Settings
Set the date and time setting method, time zone and daylight saving time for the camera.
[ S ettings Method]
Select the date and time setting method.
[ S et manually]
Set the desired date and time in [Date] and [Time].
Set the time in 24-hour format in <hour:minute:second> order.
[ S ynchronize with NTP server]
Synchronize with the time of NTP server specified in the displayed [Set NTP Server Settings Automatically].
[ S et NTP S erver S ettings Automatically]
Select one of the following setting methods.
[Disable]
Enter the IP address or host name of the NTP server in [NTP Server].
[Use DHCP]
Synchronizes with the time of the NTP server that acquired the address from the DHCP server. The acquired NTP
server address is displayed in [NTP Server (DHCP)].
In order to set this, change [System] > [Network] > [IPv4] > [IPv4 Address Settings Method] to [Auto (DHCP)]
(P. 150).
[Use DHCPv6]
Synchronizes with the time of the NTP server that acquired the address from the DHCPv6 server. The acquired
NTP server address is displayed in [NTP Server (DHCPv6)].
In order to set this, change [System] > [Network] > [IPv6] > [IPv6] to [Enable], then set [Auto (DHCPv6)] to
[Enable] (P. 151).
[Use DHCP/DHCPv6]
Synchronizes with the time of the NTP server that acquired the address from the DHCP/DHCPv6 server.
If the NTP server address can be acquired from both the DHCP server (IPv4) and DHCPv6 server, the NTP server
address acquired from the DHCP server (IPv4) will be used.
[ S ynchronization Interval (minutes)]
Enter the synchronization interval for the specified NTP server.
[Last S ync Time]
The time last synchronized with the specified NTP server will be displayed.
[System] > [Date and Time]