manualshive.com logo in svg

Canon VB-H47, Operation Manual

The Canon VB-H47 is a cutting-edge surveillance camera designed for optimal performance and security. For detailed instructions on its operation, you can easily download the free VB-H47 Operation Manual from our website. This comprehensive manual covers step-by-step procedures and is easily accessible at manualshive.com.

Share
Download
background image

44

Cropping and Displaying Part of the Video (Digital PTZ)

Able to crop and display part of a camera video in the video display area by using the Digital PTZ panel.

Note

• Digital PTZ can be operated only in the optical zoom area. Click the 

 [Digital PTZ] button to hide the digital zoom and enhanced 

digital zoom area. When zoom slider knob is in the digital zoom or enhanced digital zoom area, starting a digital PTZ moves the knob 
position to the optical zoom area. 

•

 [Digital PTZ] cannot be clicked depending on the setting of [Video] > [Video] > [Digital PTZ] > [Video Compression Method] on the 

Settings page or the Viewer’s environment.

– When [Video Compression Method] is set to H.265 and the Viewer is connected via HTTP.
– When [Video Compression Method] is H.264 or H.265 and using a web browser that cannot display H.264/H.265 video.

Cropping Video With Digital PTZ Panel

The [Digital PTZ] button turns active (purple), and the Digital PTZ panel is shown in the control display area.

The preview frame operations are the same as with the Viewer PTZ (P. 43).

Note

• The entire gray frame displayed on the digital PTZ panel corresponds to the entire image that can be taken.

• The preview frame will move in steps. Fine-tuned movement is not possible.

The video of the area inside the manipulated preview frame is magnified to fill the video display area.

Note

• For the Digital PTZ, the higher the magnification ratio, the lower the image quality.

HM4x

S32VE S32D

1

Click the 

 [Digital PTZ] button.

2

In the Digital PTZ panel, move and resize the preview frame.

Important

• Even if the camera angle is changed due to a slider operation or preset, the position of the preview frame on the Digital PTZ 

panel is fixed.

Preview Frame

HM4x

S32VE S32D

Summary of Contents for VB-H47




































































































































































































Reviews:

No comments

Related manuals for VB-H47

Malta Dynamics C7000 Instruction Manual preview
C7000
Brand: Malta Dynamics Pages: 16
Navaio NAC-HD-329VL/60 Quick Start Manual preview
NAC-HD-329VL/60
Brand: Navaio Pages: 2
cias ERMO 482X3 PRO Installation Handbook preview
ERMO 482X3 PRO
Brand: cias Pages: 80
Qvis AMB-VANIR User Manual preview
AMB-VANIR
Brand: Qvis Pages: 32
i3 International Ax32VD14 Instruction Manual preview
Ax32VD14
Brand: i3 International Pages: 28
SAB SABIP1000 Quick Installation Manual preview
SABIP1000
Brand: SAB Pages: 2
Okina EIR48X-42VF Operational Manual preview
EIR48X-42VF
Brand: Okina Pages: 4
Kilsen KL710 Installation Sheet preview
KL710
Brand: Kilsen Pages: 12
ACESEE IMX225 Hi3518C Quick Operation Manual preview
IMX225 Hi3518C
Brand: ACESEE Pages: 2
Nightowl Stage Lighting WNIP-2LTAW-BS-U Quick Start Manual preview
WNIP-2LTAW-BS-U
Brand: Nightowl Stage Lighting Pages: 12
Nice HSSOC Instructions And Installation For Use preview
HSSOC
Brand: Nice Pages: 12
AJAX Fire Protect User Manual preview
Fire Protect
Brand: AJAX Pages: 13
Velleman HAM212 User Manual preview
HAM212
Brand: Velleman Pages: 31
Datatool DT201 Operating Instructions Manual preview
DT201
Brand: Datatool Pages: 15
Valcom VIP-998-SA Quick Start Manual preview
VIP-998-SA
Brand: Valcom Pages: 3
Idis DC-B1001 Installation Manual preview
DC-B1001
Brand: Idis Pages: 22
Idis TC-D Series Installation Manual preview
TC-D Series
Brand: Idis Pages: 16
Infinique Hybrid AHD DVR Quick Installation Manual preview
Hybrid AHD DVR
Brand: Infinique Pages: 163

Brands by name

Popular brands

Load more brands