Canon imageRUNNER C3025i User Manual Download Page 683

Page: 683 / 814

#816

The number of print pages has reached the upper limit specified for the department.

●

To reset the print page count, click [Clear Count] on the [Department ID Management] page of Remote UI.

Registering/Editing Department ID and PIN(P. 364)

#818

The received data is in a file format that the machine cannot print.

●

Contact the other party and ask them to resend the data in a different file format.

#819

The received data is not supported (incorrect MIME information).

●

Contact the other party and ask them to check the settings and then resend the data.

#820

The received data is not supported (incorrect BASE64 or uuencode information).

●

Contact the other party and ask them to check the settings and then resend the data.

#821

The received data is not supported (a TIFF analysis error occurred).

●

Contact the other party and ask them to check the settings and then resend the data.

#822

A file in a USB memory device could not be printed because the format of the file is not supported.

●

Check the supported file formats and save the file again.

Printer Functions(P. 733)

#827

The received data is not supported (includes unsupported MIME information).

●

Contact the other party and ask them to check the settings and then resend the data.

Troubleshooting

674

Summary of Contents for imageRUNNER C3025i















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER C3025i

Reviews:

Related manuals for imageRUNNER C3025i

Brands by name

Popular brands

Canon imageRUNNER C3025i, User Manual

Search results

Summary of Contents for imageRUNNER C3025i

Reviews:

Related manuals for imageRUNNER C3025i

Brands by name

Popular brands