Canon imageRunner 330 Reference Manual Download Page 218

Page: 218 / 260

7–24

Handling Options

Finisher-C1/Saddle Finisher-C2

Pull out the slightly protruding staple cartrige holding it
by its left and right sides.

Lower the knob of the staple cartridge.

Remove all of the staples that slide from
the staple case.

Return the knob of the staple cartridge
to its original position.

Return the staple cartridge to its
original position, and close the front
cover (upper).

MEMO

●

When you close the cover, the staple

unit automatically performs a “dry”
stapling operation several times, to
reposition the staples.

Removing Jammed Staples from the Stapler Unit

Summary of Contents for imageRunner 330





































































































































































































































































Search results

Summary of Contents for imageRunner 330

Reviews:

Related manuals for imageRunner 330

Brands by name

Popular brands

Canon imageRunner 330, Reference Manual

Search results

Summary of Contents for imageRunner 330

Reviews:

Related manuals for imageRunner 330

Brands by name

Popular brands