Canon imageRunner 330 Reference Manual Download Page 251

Page: 251 / 260

Appendix

8–15

Checking Printing Status

You can check the printing status (Stand-by, Printing, etc.) and cancel printing using the
Print Monitor Screen.

Press the [PRINT MONITOR] key.

Select the document you wish to check the
detailed information for, and press the
[DETAILS] key.

After checking the detailed information,
press the [DONE] key.

Repeating this operation returns the display to the Basic
Features Screen.

Checking Detailed Information for Printing Documents

NOTICE

●

You cannot check the copying or Fax status or cancel copying or faxing operation, from the print status screen.

MEMO

●

If FAX functions are also installed, after pressing the
[SYSTEM MONITOR] key, select the [PRINT MONITOR] key.

Summary of Contents for imageRunner 330





































































































































































































































































Search results

Summary of Contents for imageRunner 330

Reviews:

Related manuals for imageRunner 330

Brands by name

Popular brands

Canon imageRunner 330, Reference Manual

Search results

Summary of Contents for imageRunner 330

Reviews:

Related manuals for imageRunner 330

Brands by name

Popular brands