Canon imageRunner 330 Reference Manual Download Page 240

Page: 240 / 260

Appendix

8–4

Entering the Dept.

ID and P

ss
w

Operation When User Restrictions are Enabled

Press the [PASSWORD] key, and enter the pass-
word with the Number keys (

MEMO

●

Enter the four-digit password with the Number keys (

●

If you make a mistake when entering the password, press
the

Clear

key, and enter the password again.

●

If a password has not been set, proceed to step 4.

After copying is completed, press the

key on the

control panel.

The screen for entering the department ID and password appears.

●

To make copies again, enter the department ID and password again.

NOTICE

●

If you do not press the

key after finishing your copy job,

any additional copies will be totaled under the same
department ID which you previously entered.

Operations after Using Copy Functions

Press the

key.

The Basic Features screen appears in the touch panel display.

●

If the department ID and/or password that you entered are
wrong, the message "Wrong ID or password" appears. Repeat
the procedure from step 2.

MEMO

●

After making copies, the screen for entering the password
automatically appears after the set time has elapsed if you
forget to press the

key. (See "Auto Clear Function," on p.

4-3.)

OPER

JKL

MNO

TUV

WXY

Start

OPER

JKL

MNO

TUV

WXY

Start

Summary of Contents for imageRunner 330





































































































































































































































































Search results

Summary of Contents for imageRunner 330

Reviews:

Related manuals for imageRunner 330

Brands by name

Popular brands

Canon imageRunner 330, Reference Manual

Search results

Summary of Contents for imageRunner 330

Reviews:

Related manuals for imageRunner 330

Brands by name

Popular brands