Canon imageRunner 330 Reference Manual Download

Page: 155 / 260

Setting and Adjusting Custom Common Settings to Suit

our Needs

4–34

Press the [YES] or [NO] key.

■

To store the displayed settings as standard
settings:

Select the [YES] key.

■

To cancel storing the currently displayed settings
as the Standard settings:

Select the [NO] key. The display returns to the display in step 1.

The settings displayed here are the currently set copy
settings. Press the [

▼

] or [

▲

] keys to display copy modes that

do not fit in the display area.

This screen is displayed for about two seconds.

Press the [DONE] key.

Repeat this until the Basic Features screen appears again.

Press the [STORE] key.

Storing the Current Standar

d Settings (ST

AND

ARD SETTINGS)

Custom Copy Settings

Summary of Contents for imageRunner 330





































































































































































































































































Search results

Summary of Contents for imageRunner 330

Reviews:

Related manuals for imageRunner 330

Brands by name

Popular brands

Canon imageRunner 330, Reference Manual

Search results

Summary of Contents for imageRunner 330

Reviews:

Related manuals for imageRunner 330

Brands by name

Popular brands