Canon imageRunner 330 Reference Manual Download Page 137

Page: 137 / 260

Setting and Adjusting Custom Common Settings to Suit

our Needs

4–16

Custom Settings for Copying, FAX and Printing

Enter a four-digit number as the new sys-
tem settings password and then press the
[OK] key.

Press the [DONE] key.

Repeat this until the Basic Features screen appears
again.

Setting or Changing the System Settings Password

Restricting Use of the Fax Function

The system can be set up so that the fax function cannot be used unless the optional control card is
inserted.

NOTICE

●

This setting is not necessary if the control card option is not installed.

Call up the desired screen as follows:

Additional Functions

Key

MEMO

●

The initial setting is “OFF”.

Setting or Changing the System Settings Password

This sets the password for the system administrator. If the system settings password is set, restrictions
can be placed on storing or changing the following items.

■

Common Setting Restrictions

• Restrict Use of FAX with Control Card
• Dept. ID Management

■

Custom FAX Setting Restrictions

• System Settings

MEMO

●

In the factory default condition, no system settings
password is set.

●

For details on custom FAX settings, see chapter 6
in the Facsimile Manual.

Call up the desired screen as follows:

Additional Functions

Key

To change the system settings password, first
enter the existing system settings password
and then press the [OK] key.

If making the setting for the first time, proceed to step 3.

Summary of Contents for imageRunner 330





































































































































































































































































Search results

Summary of Contents for imageRunner 330

Reviews:

Related manuals for imageRunner 330

Brands by name

Popular brands

Canon imageRunner 330, Reference Manual

Search results

Summary of Contents for imageRunner 330

Reviews:

Related manuals for imageRunner 330

Brands by name

Popular brands