Canon imageRunner 330 Reference Manual Download Page 109

Page: 109 / 260

Useful Copy Functions

3–27

ver

ting Original Ima

ge
s (NEGA/POSI)

Original

Copy

SCENE

Inverting Original Images

(NEGA/POSI)

Make copies of the entire original inverted as follows.

Place your originals and press the [SPECIAL
FEATURES] key.

Press the [NEGA/POSI] key.

Press the [DONE] key.

The display returns to the Basic Features screen.

Proceed to make copies in the usual
way.

MEMO

●

To cancel the settings, press the [SPECIAL
FEATURES] and [NEGA/POSI] keys in that
order.

●

You can also cancel the mode by pressing
the

Reset

key. (The machine returns to the

Standard mode.)

Summary of Contents for imageRunner 330





































































































































































































































































Search results

Summary of Contents for imageRunner 330

Reviews:

Related manuals for imageRunner 330

Brands by name

Popular brands

Canon imageRunner 330, Reference Manual

Search results

Summary of Contents for imageRunner 330

Reviews:

Related manuals for imageRunner 330

Brands by name

Popular brands