Canon imageRunner 330 Reference Manual Download Page 77

Page: 77 / 260

Basic Copying

2–35

Making Two-sided Copies from Two-sided Originals

→

2-SIDED)

This feature automatically turns over two-sided originals placed in the feeder to make two-sided copies.

Making

o-sided Copies fr

o-sided Originals (2

→

2-SIDED)

Two-Sided Copying

Copy

Original

Place your originals in the feeder and press the
[TWO-SIDED] key.

Press the [2

▼

2-SIDED] key, then press the [OK]

key.

Proceed to make copies in the usual way.

The display returns to the Basic

Features screen, and "2

▼

2" is

displayed above the [TWO-SIDED]
key.

MEMO

●

To cancel the settings, press the [TWO-SIDED] and [C] keys in that order.

●

You can also cancel the mode by pressing the

Reset

key. (The machine returns to the

Standard mode.)

NOTICE

●

If the feeder is not installed, this function can not be used.

Summary of Contents for imageRunner 330





































































































































































































































































Search results

Summary of Contents for imageRunner 330

Reviews:

Related manuals for imageRunner 330

Brands by name

Popular brands

Canon imageRunner 330, Reference Manual

Search results

Summary of Contents for imageRunner 330

Reviews:

Related manuals for imageRunner 330

Brands by name

Popular brands