Canon imageRunner 330 Reference Manual Download Page 97

Page: 97 / 260

Useful Copy Functions

3–15

Making Copies with Margins

Select the margin type and press the [OK] key.

■

When the [LEFT MARGIN] or [RIGHT MARGIN] key is
selected

Use [+] and [–] to set the margin for the front and back (0" to 3/4").
Then press the [OK] key.

■

When the [TOP MARGIN] or [BOTTOM MARGIN] key
is selected

Use the numeric keypad or [+] and [-] to set the margin (1/16" to 3/4").
Then press the [OK] key.

●

If you want to make the input in millimeters.

Press the [DONE] key.

The display returns to the Basic Features screen.

Proceed to make copies in the usual way.

MEMO

●

You can cancel settings by pressing the [SPECIAL
FEATURES], [MARGIN], and [C] keys in that order.

●

You can also cancel the mode by pressing the

Reset

key. (The machine returns to the Standard mode.)

NOTICE

●

If you are using the Margin and Two-sided modes together
and copying an original that already has a margin, follow the
instructions below:
• 1

→

2 sided : Set the margin for the back only.

• 2

→

2 sided : You do not need to set the margin. Proceed to

make copies in the usual way.

• 2

→

1 sided : Set the margin for the back only.

●

If you are using the Margin and Two-sided modes together
and copying an original that does not have a margin, follow
the instructions below:
• 1

→

2 sided : Set the margin for both the front and back.

• 2

→

2 sided : Set the margin for both the front and back.

• 2

→

1 sided : Set the margin.

Making Copies with Margins (MARGIN)

Summary of Contents for imageRunner 330





































































































































































































































































Search results

Summary of Contents for imageRunner 330

Reviews:

Related manuals for imageRunner 330

Brands by name

Popular brands

Canon imageRunner 330, Reference Manual

Search results

Summary of Contents for imageRunner 330

Reviews:

Related manuals for imageRunner 330

Brands by name

Popular brands