manualshive.com logo in svg

Canon imageRunner 330, Reference Manual, Page: 44 / 260

Share
Download
Canon imageRunner 330 Reference Manual Download Page 44

Basic Copying

2–2

Selecting the Copy Paper Size

 (PAPER SELECT)

Automatic Paper Selection

Au
tomatic P

a

per Selection

Place your originals and press the [PAPER SELECT] key.

1

MEMO

●

Auto Paper Selection is the Standard mode setting.

Select the [AUTO] key.

2

The screen on the left appears.

Proceed to make copies in the usual way.

3

NOTICE

●

You cannot use Auto Paper Selection when
copying the following types of originals. Copy
these using Manual Paper Selection.
• Non-standard size originals
• Highly transparent originals such as transpar-

encies

• Originals with an extremely dark background
• Originals smaller than STMT in size

●

Auto Paper Selection cannot be used together
with the following modes: ZOOM, XY ZOOM,
AUTO ZOOM, IMAGE COMB., IMAGE SEPA-
RATION, XY AUTO, Rotate Collate, Rotate
Group, and BOOKLET.

Summary of Contents for imageRunner 330





































































































































































































































































Reviews:

No comments