Canon imageRunner 330 Reference Manual Download

Page: 91 / 260

Useful Copy Functions

3–9

Superimposing F

acing P

s in a Book (BOOK O

VERLA

Superimposing Two Original Images on a Single Copy Sheet

Superimposing Facing Pages in a Book

(BOOK OVERLAY)

This feature enables you to superimpose the images from facing pages in a book or magazine onto a
single sheet of copy paper.

Place the original on the platen glass and press
[SPECIAL FEATURES].

Press the [OVERLAY] key.

Press the [BOOK OVERLAY] key, then
press the [OK] key.

The display returns to the Special Features screen.

Press the [DONE] key.

The display returns to the Basic Features screen.

Proceed to make copies in the usual way.

For the next two facing pages, place the original and press the

Start

key again. (See “Memory Copy of Original on

Platen Glass,” on p. 2-29.)

MEMO

●

To cancel the settings, press the [SPECIAL FEATURES], [OVERLAY], and [C] keys in that order.

●

You can also cancel the mode by pressing the

Reset

key. (The machine returns to the Standard mode.)

MEMO

●

Place the original face down so that the top of it is against the
top edge of the platen glass.

Summary of Contents for imageRunner 330





































































































































































































































































Search results

Summary of Contents for imageRunner 330

Reviews:

Related manuals for imageRunner 330

Brands by name

Popular brands

Canon imageRunner 330, Reference Manual

Search results

Summary of Contents for imageRunner 330

Reviews:

Related manuals for imageRunner 330

Brands by name

Popular brands