Basic Copying
2–11
Changing the Copy Ratio (Enlarging/Reducing Originals)
Automatically Setting the Copy Ratio Based on the Original
and Copy Paper Sizes
(AUTO ZOOM)
In this mode, the machine automatically selects the appropriate copy ratio based on the size of the
originals and the selected copy paper. The copy ratios are 25% to 800%.
Place your originals and press the [PAPER SELECT] key.
1
A
utomaticall
y Setting the Cop
y Ratio Based on the Original and Cop
y P
aper Siz
es (A
UT
O ZOOM)
NOTICE
●
Select a copy paper size other than “AUTO”.
Select the copy paper size.
2
Copy
Original
NOTICE
●
You cannot use the Auto Zoom mode with Auto Paper Selection.
●
You cannot copy highly transparent originals, such as transparencies, in the Auto Zoom mode. Use the
Reduction, Enlargement or Zoom modes.
●
To use the Auto Zoom mode, your originals must conform to a standard paper size.
MEMO
●
If an error occurs between the Auto Zoom copy ratio and the actual copy size, you can adjust this with the
Zoom Fine Adjustment function. (See "Fine-adjusting Zoom When Differences in Original Image and Copy
Image Occur," on p. 4-28.)
●
The copy paper placed in the stack bypass normally is not processed in the Auto Zoom mode. To process
this paper in the Auto Zoom mode, you must first specify the size of the copy paper to be placed in the
stack bypass. (See "Using the Stack Bypass," on p. 2-4.)
●
The paper sizes that can be used with Auto Zoom are as follows:
For an original placed on the platen glass : 11”x17”, LGL, LTR, STMT
For originals placed in the feeder
: 11”x17”, LGL, LTR, LTRR, STMT, STMTR
