Canon imageRunner 330 Reference Manual Download Page 223

Page: 223 / 260

7–29

Handling Options

Removing Jammed Staples from the Saddle Stitcher Unit

This procedure is only required when the Saddle Finisher-C2 is installed.

If a staple jam occurs, the message on the left appears. Follow the
procedure described below to remove any jammed staples.

Open the front cover (lower) of the Finisher.

Pull out the saddle stitcher unit.

Pull forward the stapler unit of the saddle
stitcher unit, then push it up.

Finisher-C1/Saddle Finisher-C2

Grasp the left and right ends of the
staple cartridge, and remove the
cartridge.

Removing Jammed Staples from the Saddle Stitcher Unit

Summary of Contents for imageRunner 330





































































































































































































































































Search results

Summary of Contents for imageRunner 330

Reviews:

Related manuals for imageRunner 330

Brands by name

Popular brands

Canon imageRunner 330, Reference Manual

Search results

Summary of Contents for imageRunner 330

Reviews:

Related manuals for imageRunner 330

Brands by name

Popular brands