Canon imageRunner 330 Reference Manual Download Page 120

Page: 120 / 260

Useful Copy Functions

3–38

Erasing a Cop

y Job

Storing Often Used Copy Settings in Memory

Select the memory key of the copy job that you
wish to erase, then press the [OK] key.

The message on the left appears asking if it is
OK to erase the copy job.

Select the [YES] key.

The stored copy job is erased.

Press the [DONE] key.

The display returns to the Basic Features screen.

NOTICE

●

Check the copy settings before you erase them.

MEMO

●

If you have selected a memory key to which a copy job is
stored, its settings are displayed.

●

If there are more stored copy modes than currently
displayed, you can scroll using the [

▲

] or [

▼

] keys.

MEMO

●

If you press the [YES] key, the currently stored copy
job and name are erased.

●

If you want to cancel erasing, select the [NO] key.

Press the [DONE] key.

The display returns to the Special Features screen.

Summary of Contents for imageRunner 330





































































































































































































































































Search results

Summary of Contents for imageRunner 330

Reviews:

Related manuals for imageRunner 330

Brands by name

Popular brands

Canon imageRunner 330, Reference Manual

Search results

Summary of Contents for imageRunner 330

Reviews:

Related manuals for imageRunner 330

Brands by name

Popular brands