Canon FAX-L800 User Manual Download Page 140

Page: 140 / 370

Canon

FAX-L800 User’s Guide

ENGLISH

7-10

Chapter 7

Receiving Documents

To turn off remote receiving

Press the search buttons until you see the display below.

REMOTE RX

OFF

SET

Press SET.

5. Press STOP to return to standby.

Cancelling Receiving a Document

Follow this procedure to cancel receiving a document.

1. Visually check the display to confirm that a document is being received.

26/12 ’97 FRI 12:20

RECEIVE

5012

2. To cancel the reception, press STOP.

The following message is displayed:

CANCEL DURING TX/RX
YES=(

) NO=(#)

3. Press

to cancel receiving the document or press # to let receiving continue.

After you press

an alarm sounds, document reception is cancelled, and the

following messages are displayed.

26/12 ’97 FRI 12:25

STOP KEY PRESSED

26/12 ’97 FRI 12:25

TX/RX NO.

5012

If the receive report feature is on or set to PRINT ERROR ONLY, an RX
REPORT also prints. (

16-7)

PRINTING REPORT

Summary of Contents for FAX-L800



















































































































































































































































































































































































Search results

Summary of Contents for FAX-L800

Reviews:

Related manuals for FAX-L800

Brands by name

Popular brands

Canon FAX-L800, User Manual

Search results

Summary of Contents for FAX-L800

Reviews:

Related manuals for FAX-L800

Brands by name

Popular brands