manualshive.com logo in svg

Canon FAX-L800, User Manual

Share
Download
Canon FAX-L800 User Manual Download Page 30

Canon

FAX-L800 User’s Guide

ENGLISH

2-16

Chapter 2

Setting Up

4. After the orange lock plate releases, lift it up.

A4

100%

50%

0%

5. Insert the paper cassette in the fax unit. (

Q

2-25)

6. Repeat this procedure for the other front paper cassette if you have two front

paper cassettes installed on the fax unit.

Save the orange lock plate of the paper cassette. You may want to insert it again
if you have to transport the fax unit.

Removing the Protective Sheets

The LCD on the operation panel and the paper level gauge on the front paper
cassette are covered with plastic sheets to protect them during shipping. This
protective material should be removed before you use the fax unit.

A4

100%

50%

0%

A4

100%

50%

0%

LCD

Paper Level Gauge

1. Remove the plastic sheet covering the LCD on the operation panel.

2. Remove the plastic sheet covering the paper level gauge on the front paper

cassette.

3. If you have two front paper cassettes, remove the plastic sheet covering the

paper level gauge on the other front paper cassette.

Summary of Contents for FAX-L800



















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands