Canon FAX-L800 User Manual Download Page 63

Page: 63 / 370

Canon

FAX-L800 User’s Guide

ENGLISH

3-21

Chapter 3

Getting Started

11. Press STOP to return to standby.

After the fax machine enters the energy saver mode, only the energy saver
indicator on the operation panel remains on and the LCD display shows:

ENERGY SAVER

Returning to the Full Power Mode

The display tells you the fax has entered the energy save mode with this message:

ENERGY SAVER

ENERGY SAVER

The indicator under the energy saver button to the right of the LCD display will
also light red.

To restore the full power mode, press the ENERGY SAVER button. While the
fax machine is powering up, PLEASE WAIT is displayed for a few moments.

PLEASE WAIT

While the fax unit is powering up, you can perform any operation.

The following actions will automatically restore the full power mode:

Receiving a document.

Printing an Activity Management report pre-set for printing.

Answering a call.

You can awaken the fax from the low-energy sleep mode by:

Pressing the ENERGY SAVER button.

Setting a document on the fax for sending or copying.

Summary of Contents for FAX-L800



















































































































































































































































































































































































Search results

Summary of Contents for FAX-L800

Reviews:

Brands by name

Popular brands

Canon FAX-L800, User Manual

Search results

Summary of Contents for FAX-L800

Reviews:

Brands by name

Popular brands