manualshive.com logo in svg

Canon FAX-L800, User Manual

Share
Download
Canon FAX-L800 User Manual Download Page 37

Canon

FAX-L800 User’s Guide

ENGLISH

2-23

Chapter 2

Setting Up

Loading Paper in the Side Paper Cassette

1. Pull out the side paper cassette.

2. Check the selector inside the side paper cassette and make sure it is set for

the size of the paper you are loading.

If the setting is correct, go on to step 3.

-or-

To set the paper cassette for a different paper size, slide the selector to the
correct position.

To release the guide, push it gently toward the center of the paper cassette.
Gently push it up or back until the tip is just below the line of the setting you
want. Then push it out toward the side of the paper cassette to lock it.

When you set to
letter size.

Summary of Contents for FAX-L800



















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands