Canon FAX-L800 User Manual Download Page 283

Page: 283 / 370

Canon

FAX-L800 User’s Guide

ENGLISH

15-13

Chapter 15

Maintenance & Frequently Asked Questions

Storing Recording Paper

Use only the recommended paper or paper of similar quality, and store it
carefully. When installing the recording paper, refer to page 2-25.

Recommended Paper

We recommend using Canon paper with this fax machine.

Quality

Use plain bond, typewriter quality without curls, folds, or rough edges.

Weight

64-90 g/m

Storage

C to 24

40%-60% relative humidity

Before buying large quantities of other paper, test it with the fax to make
sure it is reliable.

Use only plain white paper. Do not used perforated or coloured paper.

Paper that is either too smooth or rough may reduce print quality or cause
printer jams.

Storing the Paper Supply

Improper paper storage can affect the quality of the printing. Follow these
guidelines when you store paper.

Store unused paper in its wrapping to protect the paper against humidity.

Do not store paper on the floor where humidity is higher.

If the humidity of the surrounding area is higher than normal, store the paper
in a specially designed storage box.

To prevent excessive paper curl, do not stack paper too high.

Do not expose the stored paper supply to direct sunlight.

If paper is moved to a location of very different temperature, store the paper
in the new location for at least one day before you use it.

Summary of Contents for FAX-L800



















































































































































































































































































































































































Search results

Summary of Contents for FAX-L800

Reviews:

Canon FAX-L800, User Manual, Page: 283 / 370

Search results

Summary of Contents for FAX-L800

Reviews: