Canon FAX-L800 User Manual Download Page 34

Page: 34 / 370

Canon

FAX-L800 User’s Guide

ENGLISH

2-20

Chapter 2

Setting Up

Attaching Trays

1. Attach the output tray to the side of the printer.

2. Attach the document tray to the side of the fax unit, just above the output

tray.

Document Tray

Output Tray

Connecting the Handset (an option)

A telephone handset is available as an option for the fax machine.
This handset is for use with Listed Canon Facsimile machine only.

1. Fit the handset cradle over the holes.

2. Fasten the handset cradle with the screws provided.

Summary of Contents for FAX-L800



















































































































































































































































































































































































Search results

Summary of Contents for FAX-L800

Reviews:

Related manuals for FAX-L800

Brands by name

Popular brands

Canon FAX-L800, User Manual

Search results

Summary of Contents for FAX-L800

Reviews:

Related manuals for FAX-L800

Brands by name

Popular brands