manualshive.com logo in svg

Canon FAX-L800, User Manual

Share
Download
Canon FAX-L800 User Manual Download Page 38

Canon

FAX-L800 User’s Guide

ENGLISH

2-24

Chapter 2

Setting Up

3. The side paper cassette holds approximately 100 sheets of paper. Before you

load paper into the side paper cassette, tap the edges of the stack to make
sure the leading edge and sides of the stack are even.

4. Load the paper into the side paper cassette. Slide the edge of the stack under

the front tabs of the paper cassette.

Make sure the paper stack is not higher than the load limit marks (

NNN

) on

the left side of the paper cassette.

Check the corners of the stack and make sure they are below the tabs at the
front end of the paper cassette.

Summary of Contents for FAX-L800



















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands