Canon FAX-L800 User Manual Download Page 329

Page: 329 / 370

Canon

FAX-L800 User’s Guide

ENGLISH

16-21

Chapter 16

Summary of Important Settings

2.CHANGE DATA

Change the settings for preset polling/receiving.

SET BOX #

Enter the number of the box you want to change.

PASSWORD

Enter the password protecting the preset polling settings. You can
now change any of the settings listed in the table above (1.
SETUP FILE).

3.DELETE FILE

Delete the setting to poll at preset time.

SET BOX #

Set the box number for the box you want to delete.

PASSWORD

Enter the password of the file you want to delete.

5.POLLING BOX

Set up a polling box to store a document in your fax machine
until your fax machine is polled to send the document. (

11-17)

1.SETUP FILE

Set up a polling box to hold a document until it is polled by and
sent to another fax machine.

SET BOX #

Set a box number for the polling box.

1.FILE NAME

Enter a file name (24 characters).

2.PASSWORD

Enter a password to protect the polling box settings.

3.SUBADDRESS

Enter a 20-digit (max.) standard ITU-T subaddress.

4.TX PASSWORD

Enter a 20-digit (max.) standard ITU-T password.

5.ERASE AFTER TX

Tell the fax machine how to handle the document after it is polled and sent.

Document is erased from the memory after it is polled and sent.

OFF

Document is not erased and remains in the memory after it is polled and sent.

2.CHANGE DATA

Change the settings on the polling box. You can now change any
of the settings listed in the table above (1. SETUP FILE).

SET BOX #

Set a box number you want to change.

PASSWORD

Enter the password of the polling box you want to change. You
can now change any of the settings listed in the table above (1.
SETUP FILE).

3.DELETE FILE

Delete the polling box file.

SET BOX #

Set the box number for the box you want to delete.

PASSWORD

Enter the password of the polling box file you want to delete.

Summary of Contents for FAX-L800



















































































































































































































































































































































































Search results

Summary of Contents for FAX-L800

Reviews:

Brands by name

Popular brands

Canon FAX-L800, User Manual

Search results

Summary of Contents for FAX-L800

Reviews:

Brands by name

Popular brands