manualshive.com logo in svg

Canon FAX-L800, User Manual, Page: 227 / 370

Share
Download
Canon FAX-L800 User Manual Download Page 227

Canon

FAX-L800 User’s Guide

ENGLISH

12-9

Chapter 12

Other Special Features

Turning the Stamp Feature ON/OFF

If you have turned the TX STAMP setting ON, documents will be stamped
according to the above setting. If you have not turned on the TX STAMP feature
but you still want to occasionally stamp documents you scan for sending, or if you
have turned on the TX STAMP feature but you want to turn it off occasionally,
follow the procedure below.

1. Set the document on the fax. (

Q

6-3)

Set the document resolution, contrast, and document type. (

Q

6-4)

You can also select a sender’s name with the TTI SELECTOR button.
(

Q

6-6)

STAMP

(OPTION)

2. Open both One-touch Speed Dialling panels and press STAMP.

TX STAMP

OFF

<

<

3. If you want to stamp document pages, press the search buttons until you see

ON.

TX STAMP

ON

-or-

<

<

If you want to turn the stamp feature off, press the search buttons until you
see OFF.

TX STAMP

OFF

SET

4. Press SET.

TEL=

5. Close both One-touch Speed Dialling panels and send the document.

Summary of Contents for FAX-L800



















































































































































































































































































































































































Reviews:

No comments