Canon FAX-L800 User Manual Download Page 293

Page: 293 / 370

Canon

FAX-L800 User’s Guide

ENGLISH

15-23

Chapter 15

Maintenance & Frequently Asked Questions

3. Close the operation panel, re-attach the document tray and connect the

power cord of the fax unit to the power source. (

15-21)

Refilling the Stamp Ink Compartment (Option)

Follow this procedure to refill the stamp ink compartment if you are using the
optional stamp feature.

1. Disconnect the power cord of the fax unit from its power source, remove the

document tray, and open the operation panel. (

15-19)

100%

50%

2. Locate the stamp pad then apply only one drop of ink to the stamp ink

compartment.

To avoid a malfunction, do not add too much ink.

Use only Shachihata X Stamper Ink CS-20 Yellow.

Do not use the stamp feature for at least one hour. If you have to send a
document, turn off the stamp feature for the first hour. (

16-11)

LTR

100%

50%

To avoid ink spillage, apply only one drop of ink to the stamp pad.

Summary of Contents for FAX-L800



















































































































































































































































































































































































Search results

Summary of Contents for FAX-L800

Reviews:

Related manuals for FAX-L800

Brands by name

Popular brands

Canon FAX-L800, User Manual

Search results

Summary of Contents for FAX-L800

Reviews:

Related manuals for FAX-L800

Brands by name

Popular brands