Brother PD-3000, Instruction Manual

Page: 99 / 210

CHAPTER 4 PROGRAMMING WITH COMMANDS
PD-3000 91
Creating a double stitch in the reverse direction of the sewing path (Input
the width of the double stitch in
.)
Carrying out a double stitch on the right side of the sewing path
Double
stitch
Carrying out a double stitch on the left side of the sewing path
Creating a parallel stitch in the same direction as the sewing path (Input the
width of parallel stitch in
.)
Carrying out a parallel stitch on the right side of the sewing path
Parallel
stitch
Carrying out a parallel stitch on the left side of the sewing path
Creating an offset (Input the width for offset in
.)
Carrying out an offset on the right side of the sewing path
Offset
Carrying out an offset on the left side of the sewing path
Creating split data after basting data
Basting
Creating basting data
Specifying split points (for sewing different patterns separately in a sequence)
after feed
Feed
Moving in parallel for the feed
Starting a multiple stitch
Multiple
stitch
Creating a multiple stitch (Input the number of lines for a multiple stitch in
.)
Trace
Creating data by tracing a pattern
Editing program
Moving a pattern symmetrical to the Y-axis
Moving a pattern symmetrical to the X-axis
Moving a pattern symmetrical to a point
Retrying a multiple stitch (Input the number of lines for a multiple stitch in .)
Rotating a pattern clockwise
Rotating a pattern counterclockwise
Copying a rotated pattern clockwise
Copying a rotated pattern counterclockwise
Resizing a pattern (Input the magnification in the X direction in , and input
the magnification in the Y direction in .)
Copying a resized pattern (Input the magnification in the X direction in ,
and input the magnification in the Y direction in .)
Repeated copying
Copying symmetrically to a point
Copying a pattern symmetrically to the X-axis
Copying a pattern symmetrically to the Y-axis
Copying in the reverse direction