Brother PD-3000, Instruction Manual

Page: 121 / 210

CHAPTER 4 PROGRAMMING WITH COMMANDS
PD-3000 113
Adding a new sewing start point before the first stitch
A point is added before the current sewing start point to make it as the sewing start point.
The following describes how to change the sewing start point from 1 to 1'.
1. Carry out step 1 of "Procedure for modifying
program" to call program.
2. Press , and then press .
The work clamp moves to the sewing start point.
3. Press .
4. Move the work clamp with so that
the needle point is at 1' of the pattern sheet.
Record the coordinates (values of and ).
5. Press .
1' is programmed.
6. Move the work clamp with an
equivalent of the coordinate value recorded in
step 4 to the opposite direction. Press
.
If the moving distance is long, press .
7. Press .
The work clamp returns to the home position.
8. Press , and then press .
The needle point returns to the first stitch.
9. Press .
10. Input the number of stitches to be deleted, and
then press .
In the example, the first stitch is deleted. Press
.
The needle point moves to 1'.
11. Carry out steps 3 and 4 of "Procedure for
modifying program" to save program.