Brother PD-3000, Instruction Manual

Page: 175 / 210

CHAPTER 5 EXTENDED OPTION OUTPUT
PD-3000 167
7. Confirm that sewing commences as the work clamp lowers when both option inputs No. 1 and 2 are ON.
In the example above, the output condition for virtual output No. 2 ON is condition No. 40 (input 1 ON). If input
1 is already on at power-on, virtual output No. 2 will not be activated.
„ Temporary pause during sequence operation
Program Example 1 from the instruction manual. Confirm the option output during temporary pause.
1. Delete the registered option program using . Turn off the programmer then turn it back on.
2. Referring to Example 1 (Sequence 1 for the stacker) in the programmer instruction manual (see page
154), program outputs of No. 4, 5, and 6 and enabling conditions for No. 4.
3. After confirming that the sewing machine can be operated as programmed, press the temporary pause
switch during the sequence operation to cancel it.
Operating temporary pause during sequence operation temporarily pauses the sequence. To complete the sequence,
carry out a restore operation.
4. Add condition No. 15 (when the sewing machine enters the temporary pause state), as conditions for
output No. 4, 5, and 6 OFF.
If you press the temporary pause switch, the output is immediately turned off.