Brother PD-3000, Instruction Manual

Page: 77 / 210

CHAPTER 3 PROGRAMMING WITH ICONS
PD-3000 69
Creating basting data
Create basting data.
1. Select , and then press .
2. Move the needle to the next point with
. Press .
Creating trace data
Carry out programming by operating numerical keys and so that the needle point accurately traces a
pattern.
1. Select , and then press .
2. Input the stitch length, and then press .
3. Start operating the needle at the sewing start
point using the so that the needle
point accurately traces the pattern.
4. Press when the needle point reaches the
sewing end point.
Checking the program setting and setting attributes
Refer to "Checking the program setting and setting attributes" (page 78).