Brother PD-3000, Instruction Manual

Page: 80 / 210

CHAPTER 3 PROGRAMMING WITH ICONS
72 PD-3000
1. Select with , and then press
.
2. Press , and then press .
The work clamp moves from the start point by each
stitch.
The work clamp moves. When the needle point is
at the start point for a multiple stitch, stop it by
pressing
.
3. Press .
4. Select , and then press .
5. Select , and then press .
6. Input the stitch length and the number of lines,
and then press .
Calculation is performed based on the input data.
When the calculation ends, the needle point moves
to the end point for a multiple stitch.
Deleting a part of current data
Preadjust the needle position to the first or last point of a part to be deleted.
Refer to "Checking the program setting and setting attribute" (page 78).
1. Select , and then press .
2. Input the stitch count to delete.
3. Press to delete data following the current
needle position for the input count. Press
to delete data prior to the current needle
position.
The corresponding data is deleted.