Brother PD-3000, Instruction Manual

Page: 73 / 210

CHAPTER 3 PROGRAMMING WITH ICONS
PD-3000 65
Creating a zigzag stitch
The following three options are available for creating a zigzag stitch.
Creating a zigzag stitch so that the created curve comes to the center of the width of the zigzag
Creating a zigzag stitch so that the created curve comes to the right extremity of the width of the zigzag
Creating a zigzag stitch so that the created curve comes to the left extremity of the width of the zigzag
One to 99 points are available for plotting.
1. Select , and then press .
2. Input a zigzag type and input a zigzag stitch
width and length, and then press .
3. Move the needle to the second stitch with
. Press .
4. Repeat step 3 to a desired point. When the
needle point reaches the end point, press
twice.
Creating a zigzag circle
The following three options are available for creating a zigzag circle.
Specifying 3 points on the circumference to create a zigzag circle
Specifying a diameter to create a zigzag circle (clockwise or counterclockwise)
Specifying a radius to create a zigzag circle (clockwise or counterclockwise)
■ If is selected
1. Select , and then press .
2. Input the zigzag stitch width, stitch length and
the overlap stitch count, and then press .
Values of 0 to 9 are available for input.
3. Move the needle to the second point with
. Press .
4. Move the needle to the third point with
. Press .
Zigzag width
Zigzag pitch
Zigzag width
Zigzag type
Check that both values are 0000.00 mm.