Brother PD-3000, Instruction Manual

Page: 134 / 210

CHAPTER 4 PROGRAMMING WITH COMMANDS
126 PD-3000
Creating a multiple stitch
Commands to be used
Input the start point for a multiple stitch
Input the number of lines for a multiple stitch in . The specifiable number of lines
is 2 to 99.
Example: Number of lines for a multiple stitch Input value
5 lines 505
Input the stitch length in .
Inputting a split
1. Select the sewing start point with ,
and then press .
2. Input .
3. Move the needle point to the second point or
after with . Press .
4. When the needle point is moved to the corner,
press .
5. Repeat steps 3 and 4 until the end point of the
inside (or the outside) line is input. Press
.
6. Move the needle point to the start point of the
outside (or the inside) line with .
Press .
7. Program all necessary points in the same way.
8. Input the desired number of lines as
.
9. Input the desired stitch length as
.
10. Press .