Brother PD-3000, Instruction Manual

Page: 40 / 210

CHAPTER 3 PROGRAMMING WITH ICONS
32 PD-3000
P
P
r
r
o
o
g
g
r
r
a
a
m
m
m
m
i
i
n
n
g
g
e
e
x
x
a
a
m
m
p
p
l
l
e
e
This section describes the programming methods using specific examples.
Programming for each stitch: Page 32
Program a detailed pattern for each stitch (magnified
input): Page 33
Pattern with lines: Page 33
Pattern with curves: Page 34
Double stitch: Page 35
Continuous sewing with the work clamp in position
after thread trimming (feed): Page 36
Basting: Page 37
Symmetrical pattern: Page 38
Programming different patterns by splitting each in
sequence (split): Page 39
Zigzag stitch: Page 40
Multiple stitch: Page 41
Programming tracing according to a pattern: Page 43
* For function and operating information about each icon, refer to "Programming" (page 62).
* In the programming example, point A in the illustration is the first stitch.
Programming for each stitch
The following describes how to perform programming for each stitch according to the pattern sheet.
1. Carry out steps 1 to 3 of "Procedure for
programming with icons".
2. Select with and press
.
3. Select with , and then press .
4. Move the work clamp with .
Press when the needle point is at point B
of the pattern sheet.
5. Create the program to point C as in step 4.
6. When point C is programmed, press
twice.
7. Carry out steps 5 to 7 of "Procedure for
programming with icons".