Brother PD-3000, Instruction Manual

Page: 75 / 210

CHAPTER 3 PROGRAMMING WITH ICONS
PD-3000 67
Creating double stitch
The following three options are available for creating a double stitch.
Creating double stitch data in the reverse direction to the left side of the sewing path or the right
side
Creating double stitch data in the same direction to the left side of the sewing path or the right side
Carrying out offset to the left side of the sewing path or the right side
* If sharp angles or fine curves are included, the desired double stitch may not be achieved.
1. Select , and then press .
2. Select the type of double stitch, and then press
.
3. Select a position where a double stitch is
created, input the stitch length and the double
stitch width, and then press
.
4. Move the needle to the next point with
. Press .
Press twice to change the direction of sewing.
5. Repeat step 4 until the needle reaches the end
point and press three times.
Press twice. Calculation starts. After the
calculation, press again.
Calculation for double stitches start again. When
the calculation stops, the needle moves in the order
of A, B, C and D. The program is completed when
the needle comes to D.
Double stitch width
Stitch length
Position where a double stitch
is created
Press
three times.
Press
twice.
Start point
End point
Press twice.